DESCRIPTION
WI
Differential Pressure Gauge a2g
APPLICATIONS
• For dry, clean, non-aggressive gases, usually air
• Fan and blower monitoring
• Differential pressure monitoring in filters
• Overpressure monitoring in cleanrooms
• For very low pressures
• Fan and blower monitoring
• Differential pressure monitoring in filters
• Overpressure monitoring in cleanrooms
• For very low pressures
SPECIAL FEATURES
Design
Nominal Size
Accuracy Class
Scale ranges
Pressure limitation
Steady
Fluctuating
Overpressure safety
Max. working pressure
(static pressure)
Operating Temperature
- Ambient
- Medium
- Storage
Temperature effect
Ingress protection
Process connection
Standard Accessories
Diaphragm
Movement
Dial
Pointer and mark pointer
Basic case and case for wall mounting
Window
Case for panel mounting and mounting ring
Output signal
Power Supply
Output signal
Power Supply
Ingress protection
Measuring hose inner
• Zero adjustment in front
• Red mark pointer • Simple mounting and dismounting
• Two-part construction (measuring element and case)
• Optional version with additional electrical output signal
Per EN 837-3 and ventilation and air conditioning (VAC) regulations
110 mm
3,0
0 ÷ 50 Pa to 0 ÷ 12.500 Pa
-25 ÷ +25 Pa to -125 ÷ +125 Pa
other plus/minus ranges on request
full scale value
full scale value
20 kPa
20 kPa
-30 ÷ +80 °C
-16 ÷ +50 °C
-30 ÷ +80 °C
When the temperature of the measuring system deviates from the reference temperature (+20 °C) max. ±0,4 %/10 K of full scale value
IP 54 per EN 60 529 / lEC 529
Standard Version
Plastic, lower mount (LM) or back mount
G 1/8 (female) for hose connector
Hose connection inner diameter 4 or 6 mm
3 fixing screws
Straight or angled threaded pressure connection G 1/8 for inner diameter 4 or 6 mm
Silicone
Contact-free transmission
Aluminium Scale angle, 90°
Plastic
Plastic
Makrolon
Plastic
Electronic
4 ÷ 20 mA, 2-wire,
14 VDC
or
0 ÷ 10 V, 3-wire
15 VDC
Options
IP 65
Internationally recognised traceable calibration certificate
diameter 4 or 6 mm, in lengths between 1 and 3 m
• Red mark pointer • Simple mounting and dismounting
• Two-part construction (measuring element and case)
• Optional version with additional electrical output signal
Per EN 837-3 and ventilation and air conditioning (VAC) regulations
110 mm
3,0
0 ÷ 50 Pa to 0 ÷ 12.500 Pa
-25 ÷ +25 Pa to -125 ÷ +125 Pa
other plus/minus ranges on request
full scale value
full scale value
20 kPa
20 kPa
-30 ÷ +80 °C
-16 ÷ +50 °C
-30 ÷ +80 °C
When the temperature of the measuring system deviates from the reference temperature (+20 °C) max. ±0,4 %/10 K of full scale value
IP 54 per EN 60 529 / lEC 529
Standard Version
Plastic, lower mount (LM) or back mount
G 1/8 (female) for hose connector
Hose connection inner diameter 4 or 6 mm
3 fixing screws
Straight or angled threaded pressure connection G 1/8 for inner diameter 4 or 6 mm
Silicone
Contact-free transmission
Aluminium Scale angle, 90°
Plastic
Plastic
Makrolon
Plastic
Electronic
4 ÷ 20 mA, 2-wire,
14 VDC
or
0 ÷ 10 V, 3-wire
15 VDC
Options
IP 65
Internationally recognised traceable calibration certificate
diameter 4 or 6 mm, in lengths between 1 and 3 m
DIMENSIONS
Standard Version [mm]
Wall mounting lower mount (LM)
Panel mounting, back mount
1) Mounting for wall thicknesses from 1 to 70 mm
Wall mounting lower mount (LM)
Panel mounting, back mount
1) Mounting for wall thicknesses from 1 to 70 mm
ORDERING INFORMATION
Model / Connection location / Wall mounting or panel mounting / Inner diameter of the threaded pressure connection / Scale range / Options
Modifications may take place and materials specified may be replaced by others without prior notice.
Specifications and dimensions given in this leaflet represent the state of engineering at the time of printing.
Modifications may take place and materials specified may be replaced by others without prior notice.
Specifications and dimensions given in this leaflet represent the state of engineering at the time of printing.
AEROFILTRI s.r.l.Via Rubens, 23 • Milano • Italy
