[Skip to content]

Cardboard Framed Panel Filter with Columbus® HCS2 Collector

Cardboard Framed Panel Filter with Columbus® High Capacity Multilayer Collectors EuroSupra 2.

The High Capacity Multilayer EuroSupra collector incorporates seven layers of slit and expanded kraft with multistage designed baffle openings and one final layer of synthetic media: 20 µm.

The cardboard frame gives the Columbus HCS2 filter a great ease of installation and makes it ideal as a better alternative to cells with a cardboard and fibreglass frame.

The Cardboard Framed Panel Filters with Columbus® HCS2 Collector are available in custom frontal sizes with a thickness of 24 mm or 48 mm.

Technical Features

Code IT
Code US
Label Color
98 - 99.9 %
Holding Capacity
6.5 kg/m²
0.4 kg


Cardboard Framed Panel Filters are used for the separation of coarse dust and as overspray filters in spray booths.



The Cardboard Framed Panel Filter with Columbus® HCS2 Collector consists of the following layers, in the sense of Air Flow:

  • HC (High Capacity Layer)
  • HC+ (Reverse High Capacity Layer)
  • HC (High Capacity Layer)
  • L (Large Layer)
  • Lx (Large Crossed Layer)
  • S (Small Layer)
  • MM (Mini-Mesh Layer)
  • P2 (Polyester Type 2)

Efficiency & Holding

Overspray collectors are not commodity items and all do not perform equally well on every coating. Specific types of coatings require certain collector designs and performance levels.

The four primary categories used to assess the overall effectiveness of a particular overspray collection system are as follows:

EFFICIENCY (formally known as “arrestance efficiency” or “weight arrestance”)
The average percentage of particulate extracted or collected from the exhaust air. The higher the collector efficiency, the cleaner the exhausted air and spray booth ducts, fan, neighboring properties, plant roof, etc. Higher efficiency lowers booth maintenance costs and, with less buildup, greatly reduces the chance of a duct fire.

The measure of resistance encountered by the particulate-laden air as it passes through the collector. (Generally it is stated in inches of water column, the static pressure required to draw air through the filter.) As the collector begins to load, the resistance increases. The velocity of the air through the booth also influences the initial resistance figures and, therefore, the holding capacity and service life. The importance of proper airflow in overspray collection cannot be overemphasized. The uniformity of airflow and increased efficiency minimizes the amount of overspray deposited where it is not wanted – in difficult to clean areas within the booth, inside of the exhaust duct, on fan blades, plant roof, neighboring properties, parked cars, etc.

The amount (weight) of overspray a collector will hold before its resistance to airflow becomes prohibitive. A collector should be able to hold overspray throughout its entire depth, which is referred to as depth loading.

The length of time a collector performs effectively in terms of hours or shift periods before the resistance to airflow becomes prohibitive.

The performance of the product described in this page varies and is characteristic of each individual installation; it must therefore be measured on the system.

As a guideline, we provide some experimental data:

Coating Type
Holding Capacity
Air-dry Enamels 99 - 99.5 % 6 - 8 kg/m²
Bake-dry Enamels 99.4 - 99.9 % 5 - 7 kg/m²
Epoxies 98 - 99.5 % 6.5 - 8 kg/m²
High Solids - Enamels 99.4 - 99.9 % 5 - 7 kg/m²
Primers - Air Dry 98 - 99.5 % 6.5 - 8 kg/m²
Waterbornes 99.2 - 99.7 % 2 - 3 kg/m²

Product Line Applications

Rating Legend
  • 5 Excellent Performance
  • 4 Very good Performance
  • 3 Good Performance
  • 2 Moderate Performance
  • 1 Not Usually Recommended
Coating Type
Adhesives 4
Air-dry Enamels 4
Asphalts 4
Bake-dry Enamels 4
Clear Coats 4
Epoxies 4
Fiberglass 4
Frit 4
Gel Coats 4
Glazes - Fillers 4
High Solids - Enamels 3
Lacquers - Nitrocellulose 2
Primers - Air Dry 4
Sealers 3
Stains 3
Tar-like Coatings 4
Teflon 4
Urethanes 4
Vinyls 4
Waterbornes 4